FLOATING DOCK HARDWARE

All floating dock hardware is 1/4" hot dipped galvanized steel. Each has 9/16" hole punches on 3-1/2" centers except where indicated. Slot sizes are 9/16" x 1-5/8" except where indicated. All male and female connectors have a 3/8" tab with a 7/8" hole to fit a 3/4" pin or bolt. 
 

DockEdge+ Inc. Offers a Hardware Placement Guide, to assist in dock construction. 

Click here to download this guide.

Click here to view the assembly instructions, 


DOCK 2 GO MODULAR DOCK KIT

The DockEdge+ Dock 2 Go Modular Dock Kit includes all heavy duty hot dipped Galvanized mounting hardware required to assemble a 6 Ft. x 12 Ft. Modular floating dock section*. Each kit may be utilized to construct a stand-alone dock or may be attached to another Dock 2 Go section using a Dock 2 Go modular connector kit to increase dock length or width as required. 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-272-F Dock2Go, 6'x12' Kit, Floating

FLOATING CONNECTOR HINGE KIT

The DockEdge+ Floating Connector Hinge Kit includes all heavy duty hot dipped Galvanized mounting hardware required to securely attach Dock 2 Go modular dock sections together.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-205-F Connector Kit, Floating

FLOATING INSIDE CORNER KIT

The DockEdge+ Floating Inside Corner Kit includes all heavy duty hot dipped Galvanized mounting hardware required for lighter duty floating dock applications where an outside corner is not necessary.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-210-F Inside Corner Kit, Floating

FLOATING JOIST CORNER KIT

The DockEdge+ Floating Joist Corner Kit includes all heavy duty hot dipped Galvanized mounting hardware required to mount stringers with washer plates on your floating dock.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-215-F Inside Corner Kit, Floating

FLOATING HARDWARE

Engineered for use with our Howell™ and DockEdge+ dock floats.

Part No. Description
98-609-F Connector Hinge, Low Profile
98-618-F Corner Inside/Outside
91-112-F Connector Hinge, Heavy Duty, Galvanized
92-104-F Corner Plate, Heavy Duty, Galvanized
92-116-F Corner Plate W/Anchor Chain Bar, HD,Gal.
93-122-F Backer Plate, 9/16" Punch, HD, Galvanized
96-111-F Pin, Heavy Duty, 3-1/4" Long, 3/4" Rod
99-001-F Inside Corner, w/ Brace & Slot Hole, HD, Gal
99-002-F Angle, Inside Joist, 9/16" Punch, HD, Gal
99-004-F Outside Corner End, 9/16" Square Hole, HD, Gal
99-005-F Pipe Holder, Outside, 3", HD, Gal
99-006-F Washer Plate, 9/16" Square Hole, HD, Gal
99-007-F Pipe Holder, Inside Corner, 3", HD, Gal
99-009-F Outside Corner, Male, 9/16" Square Hole, HD, Gal
99-010-F Outside Corner, Female, 9/16" Square Hole,HD,Gal
99-011-F T Connector, Female, 9/16" Square Hole, HD, Gal
99-012-F T Connector, Male, 9/16" Square Hole, HD, Gal
99-013-F Chain Retainer, 9/16" Square Hole, HD, Gal
98-602-F Inside Corner
98-604-F Washer Plate
98-606-F Anchor Chain Plate w/Keyhole
98-610-F Inside Corner w/Anchor Chain Keyhole
98-612-F Inside Corner
98-614-F Inside Corner
98-616-F Leg Pipe Holder
99-014-F HD Side Pipe Holder
99-020-F Connector Hinge "T" Style
98-608-F Connector Hinge, Ribbon

DOCK FLOATS

The Howell™ dock float series is developed and produced by DockEdge+. This benefits you, our customer by making it possible to purchase a complete and compatible line from hardware right through to the finishing touches and knowing that the Howell float series is backed by a 10-Year Warranty against manufacturing defects.


HOWELL 250

Howell250.jpg

The Howell 250 has a floatation capacity of 260 lbs. and is also available filled with closed cellular foam for commercial use. Dimensions: 24" x 48" x 8" high (Available foam filled)

Part No. Description
99-238-F Float, 2'x4'x8", Empty, Howell 250
99-239-F Float, 2'x4'x8", Foamed, Howell 250

HOWELL 400

Howell400.jpg

With the same great qualities of the Howell 550 float, the 400 has a floatation capacity of 400 lbs. and is also available filled with closed cellular foam for commercial use. Dimensions: 24" x 48" x 12" high and a tare weight of 28 lb. (Available foam filled)

Part No. Description
99-241-F Float, 2'x4'x12", Foamed, Howell 400
99-242-F Float, 2'x4'x12", Empty, Howell 400

HOWELL 550

Howell550.jpg

Top mounted 1" drainage plug has sloped trough to eliminate water accumulation around the plug. Recessed flanges and center trough allow the use of 2 Ft. or 4 Ft. centers. Minimum wall thicknesses of 1/4" and up to 5/16" at fastening points making it extremely strong and resilient to splits and punctures. 10 easy to get at locations from which to attach the float to stringers. Dimensions: 24" x 48" x 16" high and a tare weight of 40 lb.

Part No. Description
99-246-F Float, 2'x4'x16", Howell 550

HOWELL 600

Howell600.jpg

With the same great qualities of the Howell 250 and 400 floats, the 600 has a floatation capacity of 600 lbs. and is filled with closed cellular foam for commercial use. Dimensions: 24" x 48" x 16" high and a tare weight of 45 lb.

Part No. Description
99-243-F Float, 2'x4'x16", Howell 600

STATIONARY DOCK HARDWARE

All stationary dock hardware is 1/8" (nominal) hot dipped galvanized steel with 7/16" holes for 3/8" carriage bolts.

DockEdge+ Inc. offers a Hardware Placement Guide, to assist in dock construction. 

Click here to download this guide.


STATIONARY CONNECTOR HINGE KIT

STATIONARYCONNECTORHINGEKIT.jpg

The DockEdge+ Stationary Connector Hinge Kit includes all heavy duty hot dipped Galvanized mounting hardware required to join dock sections or a fixed ramp to the dock at varying angles.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-220-F Connector Kit, Stationary

STATIONARY INSIDE CORNER KIT

STATIONARYINSIDECORNERKIT.jpg

The DockEdge+ Stationary Inside Corner Kit includes all heavy duty hot dipped Galvanized mounting hardware required for stationary dock applications where an outside corner is not necessary.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-225-F Inside Corner Kit, Stationary

STATIONARY SIDE LEG HOLDER KIT

STATIONARYSIDELEGHOLDERKIT.jpg

The DockEdge+ Stationary Side Leg Holder Kit includes all heavy duty hot dipped Galvanized mounting hardware required to securely mount side legs to the inside or outside of the dock frame without deforming wood causing bolt loosening and dock shifting.* 

* Fasteners, lumber, floatation and anchorage sold separately to allow for consumer preferences or requirements.

Part No. Description
85-230-F Side Leg Holder Kit, Stationary

STATIONARY HARDWARE

Engineered for strength, durability and simplicity.

Part No. Description
86-100-F Corner Leg Holder, Galvanized
86-101-F Side Leg Holder, Galvanized
99-003-F Side Leg Pipe Holder, HD, Galvanized
86-102-F Base Plate, Galvanized
86-103-F Connector Hinge, Galvanized
86-104-F Corner Plate, Galvanized
87-107-F Leg Brace Holder, Corner, (1Pc/Bag), Gal
87-122-F Backer Plate, 7/16" Punch, Galvanized
89-101-F Leg Brace, (3 Pcs/Set), Galvanized
91-111-F Pipe/Leg Cap, 1-7/8", PVC, Wht, (4Pcs/Bag)
R1403 Pipe/Leg Cap, 1-7/8", PVC, Wht, Bulk
91-116-F Corner Plate W/Anchor Tie Down Bar, Gal
93-105-F Leg Brace Holder, In-Line, (1Pc/Bag), Gal
93-110-F Leg Pipe, 1-7/8", Galvalume, 10'
93-168-F Leg Pipe, 1-7/8", Galvalume, 6'8"
94-102-F Bottom Pad, Galvanized
94-200-F Auger,LegPipe,Female,Fits up to 2"OD Pipe,Gal
95-122-F Corner Bracket, Inside Joist, Galvanized
97-103-F Pin, 6-5/8" Long, 1/2" Rod, For 86-103-F
86-105-F Connector Hinge Kit "T" Style
86-106-F Connector Hinge
91-119-F Anchor Chain Corner
95-123-F Washer Plate