MOORING WHIPS

The practical alternative to marine railways, davits and lifts, these fiberglass Mooring Whips are exceptionally strong, attractive and do not obstruct your waterfront view. Each whip mounts with a durable cast aluminum base with built-in cleat. These quality Mooring Whips act as a spring to maintain your boat at a safe convenient distance away from your dock to prevent impacts caused by waves or the wakes of other passing watercraft. Complete with double braided nylon whip lines, spring lines, and stainless steel mounting hardware. Some mooring areas may be too rough for any type of tie-up system. Weight is more critical than boat length when selecting the correct size of whip.


Economy Mooring Whips

3100-F.jpg

The economical way to fasten your boat, these fiberglass Whips are exceptionally strong, attractive and will not obstruct your waterfront view. Acting as a spring, each whip is comprised of solid, fiberglass rod. Durable cast aluminum bases with a tough 3/8" thick mounting footprint and molded-in cleat, ring and thumb screw for securing the whip into position. Unaffected by UV, each whip also includes a conventional tip to allow easier access to your boat. Each whip is constructed to the most rigid specifications and is of the highest quality, Patented materials.

Available in 8 Ft. and 12 Ft. sizes for craft up to 23 Ft. And up to 4000 lb.

Part No. Description
DE3100F 8' Mooring Whip (set of 2) for craft up to 18 ft. or 2000Lb
DE3120F 12' Mooring Whip (set of 2) for craft up to 23 ft. or 4000Lb
DE3000F Mooring Whip Base, with T Knob
DE3100RF Replacement Whip for 3100
DE3120RF Replacement Whip for 3120

Premium Mooring Whips

3200-F.jpg

These Premium Whips start with a solid fiberglass rod and are then manufactured in multi-stages with an exclusive cross-wound fiberglass for extra rigidity unobtainable with solid rod alone. This multi-stage manufacturing gives these whips the necessary strength and flex to retain the boats' position. Exclusive "Plug & Socket" design for quick and easy separation and cast aluminum base with built-in cleat, ring and thumb screw. Each whip includes our unique functional roller tip and a tie-off cleat for easier access to your boat. Stainless steel mounting hardware included.

Available in 8 Ft., 12Ft., 14Ft. & 16Ft. sizes for craft up to 33 Ft. And up to 20,000 lb.

Part No. Description
DE3200F 8' Mooring Whip (set of 2) for craft up to 18 ft. or 2500Lb
DE3400F 12' Mooring Whip (set of 2) for craft up to 23 ft. or 5000Lb
DE3600F 14' Mooring Whip (set of 2) for craft up to 28 ft. or 10000Lb
DE3800F 16' Mooring Whip (set of 2) for craft up to 33 ft. or 20000Lb
DE3000F Mooring Whip Base, with T Knob
DE3200RF Replacement Whip for 3200
DE3400RF Replacement Whip for 3400
DE3600RF Replacement Whip for 3600
DE3800RF Replacement Whip for 3800
DE3900WF Mooring Whip Top only, for 3400, 3600
DE3905WF Mooring Whip Bottom only, for 3600, 3800
DE3910WF Mooring Whip Bottom only, for 3400
DE3915WF Mooring Whip Top only, for 3800

Ultimate Mooring Whips

3450-F.jpg

Manufactured from the same materials and to the same exacting premium quality standards of the Premium Whips, these Ultimate Whips include rocker bases to compensate for most tidal fluctuations and to clear flying bridges and towers when not in use.

Available in 12Ft., 14Ft. & 16Ft. sizes for craft up to 33 Ft. And up to 20,000 lb.

Part No. Description
DE3450F 12' Mooring Whip (set of 2) for craft up to 23 ft. or 5000Lb
DE3650F 14' Mooring Whip (set of 2) for craft up to 28 ft. or 10000Lb
DE3850F 16' Mooring Whip (set of 2) for craft up to 33 ft. or 20000Lb
DE3010F Mooring Whip Rocker Base
DE3400RF Replacement Whip for 3450
DE3600RF Replacement Whip for 3650
DE3800RF Replacement Whip for 3850
DE3900WF Mooring Whip Top only, for 3450, 3650
DE3905WF Mooring Whip Bottom only, for 3650, 3850
DE3910WF Mooring Whip Bottom only, for 3450
DE3915WF Mooring Whip Top only, for 3850

Mooring Arms

An economical alternative or enhancement to bumpers and dock bumper profiles, these Mooring Arms retain your watercraft a safe and convenient distance from the dock face to minimize the possibility of damage from wind, wake and waves. These easy-to-install mooring arms apply vector based forces to the bow and stern of the watercraft allowing it to freely and effortlessly follow wave and water action such as tidal fluctuations, yet securely keep the craft at arms length from the dock surface. 

Manufactured from the same durable cross-wound fiberglass as our DockEdge+ and Howell mooring whips with polyethylene tie-retainers and stainless steel hardware. Hot-dipped galvanized cleats, mooring lines and DockEdge+ quality craftsmanship is included in every Mooring Arm kit. 

Available in 4 Ft. And 6 Ft. Lengths for watercraft from PWC's to mid-sized cruisers.

Part No. Description
DE3034F 4 ft. Mooring Arm for small watercraft and PWC's (set of 2)
DE3036F 6 ft. Mooring Arm for craft up to 5000Lb (set of 2)

Wake Watchers

  • Protects passengers and your boat
  • Securely moors boats up to 3500lb (1500kg)
  • Protects your boat from dock contact
  • Allows your boat to come close to the dock for each passenger boarding
  • Automatically repositions your boat safely 3ft (1m) away from the dock
  • Adjustable tension
  • Resists lateral, vertical and horizontal motion
  • Featured in Popular Science magazine
3050-F.jpg
Part No. Description
DE3050F Wake Watcher, Set of 2