PVC EDGE BUMPERS


PREMIUM PVC EDGE BUMPERS

DockEdge+ Premium PVC products are the best line of PVC bumpers available on the market today. Our PVC products also provide greater protection for bathers against splintering and skin abrasions.


1001-B-F.jpg

SINGLE "P"

Easily installed on any horizontal or vertical surface. Large "P" section with large air volume provides excellent protection. Uses large corners, end plugs and connectors as seen in assembly below.

Available in white, black and navy blue.

Part No. Description
1001-F White Single "P" Profile, 32 ft. (4 x 8' lengths)
1001-B-F Black Single "P" Profile, 32 ft. (4 x 8' lengths)
1001-N-F Navy Blue Single "P" Profile, 32 ft. (4 x 8' lengths)
1004-F.jpg

SINGLE "D"

Ensures peace of mind for any runabout or personal watercraft owner. Uses small corners, end plugs and connectors as seen in assembly illustration below. Install on any horizontal or vertical surface.

Available in White Only

Part No. Description
1004-F White Single "D" Profile, 80 ft. (10 x 8' pieces)
1002-F.jpg

DOUBLE "D"

Provides double the protection with two air-filled channels. Uses small corners, end plugs and connectors as seen in assembly illustration below. Easily installed horizontally or vertically on any dock or boat house. Requires 2 End Plugs or Connectors for each joint.

Available in white and navy blue.

Part No. Description
1002-F White Double "D" Profile, 40 ft. (5 x 8' lengths)
1002-N-F Navy Blue Double "D" Profile, 40 ft. (5 x 8' lengths)
1022-F.jpg

PILING POST BUMPER

Premium marine grade PVC construction

Molded-in UV Inhibitors & Fungicides

Integral strengthening ribs

Curved profile and extended legs make piling post mounts easier

Available in 6 Ft. Lengths

Part No. Description
1022-F White, 6 ft. Lengths, Capped one end (Top)
1022-B-F Black, 6 ft. Lengths, Capped one end (Top)
1020-F.jpg

PILING BUMPER

Premium marine grade PVC construction

Molded-in UV Inhibitors & Fungicides

Integral strengthening ribs

Curved profile to make piling mounts easier

Mounts easily on curved OR flat surfaces

Available in 6 Ft. Lengths

Part No. Description
1020-F White, 6 Ft Lengths, Capped one end (Top)
1020-B-F Black, 6 Ft. Lengths, Capped one end (Top)
1020-S-F Beige, 6 Ft. Lengths, Capped one end (Top)
1050-FX.jpg

CORNER EDGE PROFILE

The answer to every boater's docking problems. It may be mounted horizontally or on vertical dock corners and pilings. The unique design also functions as a handy grab rail when docking and is perfect for Bass and Ski boats where the gunwale overhangs the dock and requires top protection. This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.

Available in white only

Part No. Description
1050-F White Corner Edge Profile, 48 ft. (6 x 8' lengths)
1052-F.jpg

AIR CUSHION PREMIUM CORNERS

Connect AIR CUSHION Premium Corners at any outside 90 degree angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for AIR CUSHION System.

Available in white and navy blue.

Part No. Description
1052-F White Premium Corner
1052-N-F Navy Blue Premium Corner
1028-F.jpg

AIR CUSHION CONNECTORS

Connect AIR CUSHION profiles. Use wth DockEdge+ End Plugs, Corners and PVC solvent for AIR CUSHION System.

Available in white and navy blue.

Part No. Description
1028-F White Large Connector, (2 Pieces)
1028-N-F Navy Blue Large Connector, (2 Pieces)
1029-F White Small Connector, (4 Pieces)
1029-N-F Navy Blue Small Connector, (4 Pieces)
1048-F.jpg

AIR CUSHION CORNERS

Connect AIR CUSHION Profiles at any outside 90 degree angle corner. Use with DockEdge+ Connectors, End Plugs and PVC solvent for AIR CUSHION System.

Available in white and navy blue.

Part No. Description
1048-F White Large Outside Corner, (2 Pieces)
1048-B-F Black Large Outside Corner, (2 Pieces),
1048-N-F Navy Blue Large Outside Corner, (2 Pieces),
1049-F White Small Outside Corner, (4 Pieces),
1049-N-F Navy Blue Small Outside Corner, (4 Pieces),
1026-F.jpg

AIR CUSHION END PLUGS

Seal AIR CUSHION Profile ends. Use with DockEdge+ Connectors, Corners and PVC solvent for AIR CUSHION System.

Available in white and navy blue.

Part No. Description
1026-F White Large End Plug, (2 Pieces)
1026-B-F Black Large End Plug, (2 Pieces)
1026-N-F Navy Blue Large End Plug, (2 Pieces)
1027-F White Small End Plug, (4 Pieces)
1027-N-F Navy Blue Small End Plug, (4 Pieces)
1051-F.jpg

PVC SOLVENT

Ideal for cementing all Corners, End Plugs and Connectors to AIR CUSHION Profiles to create the AIR CUSHION System. May be subject to shipping restrictions.

Part No. Description
1051-F Clear PVC Cement, (4 Fl. Oz. / 118ml)
1015-F.jpg

SUPER SAVER

Developed to be installed as a conventional profile OR as an AIR CUSHION profile system by using Corners, End Plugs and Connectors.

Easily installed on any horizontal or vertical surface. Large air volume provides excellent protection. Corners, end plugs, connectors and stainless steel screws sold separately.

Part No. Description
1015-F White Super Saver Profile, 24 ft. (3 x 8' lengths)
1015-B-F Black Super Saver Profile, 24 ft. (3 x 8' lengths)
1015-N-F Navy Blue Super Saver Profile, 24 ft. (3 x 8' lengths)
1010-F.jpg

UNIVERSAL

Unique design allows mounting in several configurations to suit any application. Mount flat on docks for traditional use, as a heavy-duty double wall fender, or as a corner protector.

Available in white only.

Part No. Description
1009-F White Universal Profile, (50 Ft/Roll)
1010-F White Universal Profile, (25 Ft/Roll)
1012-F White Universal Profile, (12 Ft/Roll)

CLASSIC PRODOCK

CLASSIC PRODOCK commercial grade heavy duty vinyl profiles have a smooth high-gloss finish and are manufactured with 100% virgin material with UV inhibitors and fungicides, superior to similar double molded profiles using recycled materials. Our PRODOCK Profiles are the ultimate in heavy-duty cushioning and offer years of protection for your boat. Available in three different styles and colors with heavier walls and integrally molded ribs for superior strength and durability. They will retain their resilience in all weather conditions and resist discoloration, mildew, salt water, hardening and tearing. Ideal for use in marinas and larger commercial applications.


1200-F.jpg

HEAVY "P"

This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.

Part No. Description
1200-F White Heavy "P" Profile, 24 ft. (3 x 8' lengths)
1201-F Beige Heavy "P" Profile, 24 ft. (3 x 8' lengths)
1202-F Grey Heavy "P" Profile, 24 ft. (3 x 8' lengths)
1210-F.jpg

HEAVY SLANT "P"

This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.

Part No. Description
1210-F White Heavy Slant "P" Profile, 24 ft. (3 x 8' lengths)
1211-F Beige Heavy Slant "P" Profile, 24 ft. (3 x 8' lengths)
1212-F Grey Heavy Slant "P" Profile, 24 ft. (3 x 8' lengths)
1205-F.jpg

HEAVY "D"

This exceptionally strong profile is further reinforced by two internal supports. like all DockEdge+ profiles, it is constructed of marine grade flexible PVC, developed not to chip or crack under normal usage. Unaffected by oil, gas or salt water. UV and fungus inhibitors prevent fading, yellowing, deterioration from sunlight and unsightly blotching.

Part No. Description
1205-F White Heavy "D" Profile, 24 ft. (3 x 8' lengths)
1206-F Beige Heavy "D" Profile, 24 ft. (3 x 8' lengths)
1207-F Grey Heavy "D" Profile, 24 ft. (3 x 8' lengths)
1230-F.jpg

SUPER FULL FACE

Extra-wide profile surface. Co-extruded heavy duty ribbed vinyl construction with bright white finish. Molded-in UV Inhibitors and Fungicides. Ideal for marinas, dock builders and commercial applications.

Part No. Description
1230-F White Super Full Face Profile, 12 ft. (2 x 6' lengths)
1054-F.jpg

HEAVY SLANT "P" CORNER

Constructed of marine grade flexible PVC, resists chipping and cracking under normal use. Resistant to oil, gas and salt water. UV Inhibitors prevent fading, sunlight degradation, blotching. Fungicides suppress the growth of mold, bacteria and mildew.

Roto-molded for even wall thickness

Fits heavy slant "P" profiles

Part No. Description
1054-F White Corner, Heavy Slant "p" Profile
1054-B-F Black Corner, Heavy Slant "p" Profile
1054-G-F Grey Corner, Heavy Slant "p" Profile

STANDARD HEAVY DUTY

DockEdge+ Standard Heavy Duty Profiles are constructed of marine grade flexible PVC, will not chip or crack under normal usage, and are unaffected by oil, gas or salt water. UV Stabilizers prevent yellowing, deterioration from sunlight and unsightly blotching. Protect your investment with a durable commercial grade protection system.


1076-F.jpg

FLEXGUARD™

Designed with both smooth and ribbed surfaces, this bumper is manufactured from flexible PVC, containing both U.V. Inhibitors and Fungicides. The smooth or ribbed reversible surface adds strength and can be mounted with either surface showing. Mount with as large or small a wave pattern as is desirable for your application. Sold in 25 Ft. Rolls and 5" width.

Available in white, beige and grey.

Part No. Description
1075-F White FlexGuard Profile, (25 Ft/Roll)
1076-F Beige FlexGuard Profile, (25 Ft/Roll)
1077-F Grey FlexGuard Profile, (25 Ft/Roll)
1160-F.jpg

FULL FACE

Ideal for larger applications, this profile provides extra strength and security against damage to boats or property. Double internal channels with cross girder adds additional protection from impacts and provides a large contact area.

Part No. Description
1160-F White Full Face Profile, (16 Ft/Roll)
1161-F Beige Full Face Profile, (16 Ft/Roll)
1162-F Grey Full Face Profile, (16 Ft/Roll)
1163-F Black Full Face Profile, (16 Ft/Roll)
1104-F White Full Face Profile, 24 ft. (3 x 8' lengths)
1108-F Beige Full Face Profile, 24 ft. (3 x 8' lengths)
1112-F Grey Full Face Profile, 24 ft. (3 x 8' lengths)
1116-F Black Full Face Profile, 24 ft. (3 x 8' lengths)
1170-F.jpg

SMALL "P"

Perfect for small outboards or personal watercraft. Will retain resiliency and brilliance for years. Can be installed in minutes.

Part No. Description
1170-F White Small "p" Profile, (16 Ft/Roll)
1171-F Beige Small "p" Profile, (16 Ft/Roll)
1172-F Grey Small "p" Profile, (16 Ft/Roll)
1173-F Black Small "p" Profile, (16 Ft/Roll)
1105-F White Small "p" Profile, 24 ft. (3 x 8' lengths)
1109-F Beige Small "p" Profile, 24 ft. (3 x 8' lengths)
1113-F Grey Small "p" Profile, 24 ft. (3 x 8' lengths)
1118-F Black Small "p" Profile, 24 ft. (3 x 8' lengths)
1180-F.jpg

SLANT "P"

Provides a larger contact area for added protection, combined with resiliency and durability.

Part No. Description
1180-F White Slant "p" Profile, (16 Ft/Roll)
1181-F Beige Slant "p" Profile, (16 Ft/Roll)
1182-F Grey Slant "p" Profile, (16 Ft/Roll)
1183-F Black Slant "p" Profile, (16 Ft/Roll)
1106-F White Slant "p" Profile, 24 ft. (3 x 8' lengths)
1110-F Beige Slant "p" Profile, 24 ft. (3 x 8' lengths)
1114-F Grey Slant "p" Profile, 24 ft. (3 x 8' lengths)
1117-F Black Slant "p" Profile, 24 ft. (3 x 8' lengths)

STANDARD "D"

This versatile and strong profile without a lip can be mounted vertically or horizontally anywhere on the dock face. Great for pilings too. Made of marine grade PVC with UV Inhibitors and Fungicides. Packaged in easy to use rolls for fewer joints.

Part No. Description
1190-F White "D" Profile, (16 Ft/Roll)
1191-F Beige "D" Profile, (16 Ft/Roll)
1192-F Grey "D" Profile, (16 Ft/Roll)
1193-F Black "D" Profile, (16 Ft/Roll)

ECONOMY


1125-F.jpg

"C" GUARD

This economy "C" Shape co-extruded profile is made to exacting standards from marine grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 6 Ft. Lengths or 10 Ft. Coils. It can be used on flat surfaces as well as on pilings.

Part No. Description
1125-F White "C" Guard Profile, 90 ft. (15 x 6' lengths)
1129-F Grey "C" Guard Profile, 90 ft. (15 x 6' lengths)
1133-F White "C" Guard Profile, 24 ft. (4 x 6' lengths)
1131-F White "C" Guard Profile, (10 Ft/Bag)
1132-F White "C" Guard Profile, (10 Ft/Roll)

DOCK GUARD

The economy Dock Guard co-extruded profile can be used in light to medium duty applications. It features a raised lip for gunwale protection on Ski and Bass boats. Fabricated from marine grade PVC with UV Inhibitors and Fungicides.

Part No. Description
1126-F White Dock Guard Profile, 90 ft. (15 x 6' lengths)
1130-F Grey Dock Guard Profile, 90 ft. (15 x 6' lengths)
1134-F White Dock Guard Profile, 24 ft. (4 x 6' lengths)
1135-F White Dock Guard Profile, (10 Ft/Bag)
1136-F White Dock Guard Profile, (10 Ft/Roll)